Skip to main content
Bioresources and Bioprocessing
Download PDF

Assembly of cellulases with synthetic protein scaffolds in vitro

Bioresources and Bioprocessing volume 2, Article number: 16 (2015) Cite this article

Abstract

Background

Enzymatic cascades in metabolic pathways are spatially organized in such a way as to facilitate the flow of substrates. The construction of artificial cellulase complexes that mimic natural multienzyme assemblies can potentially enhance the capacity for cellulose hydrolysis. In this study, an artificial cellulase complex was constructed by tethering three cellulases to a synthetic protein scaffold.

Results

Three pairs of interacting proteins were selected and characterized. The artificial protein scaffolds were constructed by fusing three interacting proteins. Cellulases were tethered to these synthetic scaffolds in different orders. The optimal assembly resulted in a 1.5-fold higher hydrolysis of cellulose than that achieved by unassembled cellulases.

Conclusions

A novel artificial protein scaffold was constructed and used to assemble three cellulases. The resultant increase in enzymatic activity suggests that this can be used as a strategy for enhancing the biocatalytic capacity of enzyme cascades.

Background

Multienzyme pathways in living systems comprise cascades in which enzymes are tethered together into assemblies that facilitate substrate flow between components, limit the diffusion of intermediate metabolic products, and increase the yield from sequential reactions [1,2]. There have been various attempts to produce multienzyme assemblies in vitro, including by gene fusion, protein or DNA scaffold construction, and chemical modification [3]. Although the simplest way is by enzyme fusion, this often results in loss of enzymatic activity or formation of inclusion bodies [4], while chemical modification can also impair enzymatic activity [5]. Moreover, the high cost of generating DNA scaffolds makes this approach infeasible on a large scale [6,7].

Protein scaffolds are an attractive strategy for bringing together enzymes. A 77-fold enhancement in product concentration was observed in an assembly of three mevalonate biosynthetic enzymes with a protein scaffold composed of metazoan signaling proteins [8]. In another study, a self-assembled enzyme complex using cellulosome achieved a 13.4-fold increase in reaction rate [9], while a proliferating cell nuclear antigen-based assembly of P450 with ferredoxin and ferredoxin reductase showed high catalytic activity [10]. The protein scaffolds used in these studies were limited to metazoan signaling proteins and cellulosome components [11-14], which may not be amenable to all types of enzyme cascades. As such, there is an ongoing need for novel and different types of protein scaffolds.

Cellulose is the most abundant renewable resource on Earth and plays a significant role in biofuel production [15]. Cellulose is broken down into oligosaccharides by endoglucanase (EG) and exoglucanase (CBH) before β-glucosidase (BGL) hydrolyzes cellobiose into glucose [16]. EG, CBH, and BGL are enzymes in the cellulose degradation pathway that act synergistically; coexpressing these enzymes improves the efficiency of cellulose degradation [17]. It was hypothesized that a highly ordered assembly containing the three cellulases would enhance their activities and thereby increase cellulose hydrolysis. Therefore, CelccA (EG), CelccE (CBH), and Cel2454 (BGL) were selected as a model system for protein scaffold-mediated assembly strategy.

In this study, considering the correct expression and assembly of proteins, three pairs of interacting proteins (IPA/IPa, IPB/IPb, and IPC/IPc) from E. coli K12 [18] were selected to construct a protein scaffold for three cellulases - namely, CelccA (EG), CelccE (CBH), and Cel2454 (BGL) (Figure 1). The enzymes were arranged in different orders and the effect on activity was investigated. The multienzyme complex in best order was characterized in detail and compared with the unassembled components.

Figure 1
figure 1

Schematic representation for assembly of cellulases on a protein scaffold. Three cellulases (CBH, EG, BGL) and three pairs of interaction proteins (IPA-IPa, IPB-IPb, IPC-IPc) were used for the assembly.

Full size image

Methods

Strains and medium

Escherichia coli DH5α was used for cloning, and E. coli BL21 (DE3) was used for protein expression. Cells were cultured in Luria-Bertani (LB) medium (10.0 g/l tryptone, 5.0 g/l yeast extract, 10.0 g/l NaCl) supplemented with either 100 mg/l ampicillin or 50 mg/l kanamycin.

Plasmid construction

PCR primer sequences are listed in Table 1. All plasmid sequences were validated by sequencing. To generate the pET21a-IPA plasmid, the IPA gene (GenBank accession no. EU899769.1) was amplified from E. coli K12 genomic DNA using the IPA-F/IPA-R primer pair. The PCR product was digested with NdeI/XhoI and ligated into pET21a digested with the same restriction enzymes. Similarly, plasmids pET21a-IPa, pET21a-IPB, pET21a-IPb, pET21a-IPC, and pET21a-IPc were constructed by amplifying the DNA sequences of IPa, IPB, IPb, IPC, and IPc (GenBank accession nos. EU895384.1, EU8971IPC.1, AB9163IPA.1, EU893769.1, and EU891369.1, respectively) using the primer pairs IPa-F/IPa-R, IPB-F/IPB-R, IPb-F/IPb-R, IPC-F/IPC-R, and IPc-F/IPc-R, respectively. Plasmids pET28a-celCCA, pET28a-celCCE, and pET28a-cel2454 were constructed by amplifying the DNA sequences of celCCA, celCCE, and cel2454, respectively (GenBank accession nos. M93096.1, M87018.2, and ACL76783.1, respectively), from the genomic DNA of Clostridium cellulolyticum DSM 5812 using the primer pairs A-F/A-R, E-F/E-R, and 4-F/4-R, respectively [19,20].

Table 1 Primers used in this work
Full size table

Plasmid pET28a-IPaA had an expression cassette containing IPa and celCCA at the N and C termini, respectively. A DNA fragment encoding IPa was amplified with the primer pair IPaA-F/IPaA-R and cloned into pET28a-celCCA by Seamless Cloning [21]. Plasmid pET28a-AIPa containing celCCA and IPa at the N and C termini, respectively, was generated with the primer pair AIPa-F/AIPa-R. Plasmid pET28a-IPbE containing IPb and celCCE at the N and C termini, respectively, was generated with primer pair IPbE-F/IPbE-R. Plasmid pET28a-EIPb containing celCCE and IPb at the N and C termini, respectively, was constructed with primer pair EIPb-F/EIPb-R. Plasmid pET28a-IPc4 containing IPc and cel2454 at the N and C termini, respectively, was generated with primer pair IPc4-F/IPc4-R. Plasmid pET28a-4IPc containing cel2454 and IPc at the N and C termini, respectively, was constructed with primer pair 4IPc-F/4IPc-R.

Plasmid pET21a-ScafBAC had an expression cassette containing IPA flanked by IPB and IPC at the N and C termini, respectively. The DNA fragments encoding IPB, IPA, and IPC were amplified with the primer pairs ScafBAC-F1/IPB-R, ScafBAC-F2/IPA-R, and ScafBAC-F3/ScafBAC-R, respectively. The three fragments were cloned into pET21a by Seamless Cloning. Plasmid pET21a-ScafABC was constructed using primer pairs ScafABC-F1/IPA-R, ScafABC-F2/IPB-R, and ScafABC-F3/ScafABC-R, and plasmid pET21a-ScafBCA was generated using primer pairs ScafBAC-F1/IPB-R, ScafABC-F3/IPC-R, and ScafBCA-F/ScafBCA-R.

Protein expression and purification

Recombinant proteins were precultured overnight at 37°C in LB medium supplemented with appropriate antibiotics. The cultures were inoculated in fresh LB medium containing antibiotics and incubated at 37°C until the optical density at 600 nm reached 0.8. The cultures were then cooled to 18°C, and isopropyl-β-d-thiogalactopyranoside was added to a final concentration of 0.1 mM. After 20 h, cells were harvested by centrifugation for 10 min at 8,000 rpm and 4°C, resuspended in 20 mM phosphate-buffered saline (PBS; pH 7.0), and disrupted by sonication on ice. Cellular debris was removed by centrifugation for 40 min at 11,000 rpm. Proteins were purified using a HisTrapFF column (GE Healthcare, Waukesha, WI, USA), and protein concentration was determined by the Bradford method.

Biolayer interferometry

Binding affinities between proteins were measured by biolayer interferometry (Octet QKe; Fortebio, Menlo Park, CA, USA), which detects changes in mass (protein density) on a biosensor; changes in the reflected interference wave pattern between the sample and an internal reference layer result in a phase shift that can be followed in real time in both kinetic and quantitative modes [22]. All experiments were performed in kinetic buffer (20 mM PBS, pH 7.0; 1 mg/ml bovine serum albumin (BSA), and 0.02% Tween 20). One of the proteins (1 μM) was biotinylated by incubating with 2 μl biotinyl N-hydroxysuccinimide ester for 1 h at room temperature, with excess biotin removed using a desalting column. The biotinylated protein was loaded onto the streptavidin biosensor by incubating for 240 s. The immobilized protein was equilibrated with kinetic buffer for 180 s, and the corresponding protein (1 μM) was associated to the biotinylated protein by incubating for 800 s. Dissociation was measured for 800 s in kinetic buffer. For each assay, a control experiment was carried out using BSA. Binding affinity was independent of which protein was loaded onto the streptavidin biosensor [23-26].

Enzyme assays

The BGL activity was measured by incubating 135 μl of 2.5 mM p-nitrophenyl β-d-glucopyranoside solution in 20 mM sodium phosphate buffer (pH 7.0) with 7.5 μg of pure enzyme solution at 37°C for 30 min. The reaction was terminated by adding 70 μl of 0.4 M Na2CO3 and the absorbance at 420 nm was measured. One unit of enzyme was defined as the activity producing 1 μmol of p-nitrophenol per min under the assay conditions. EG/CBH activity was measured by incubating 90 μl of 1.5% (wt/vol) carboxymethyl cellulose (CMC) in 20 mM sodium phosphate buffer (pH 7.0) with 5 μg of pure enzyme solution at 37°C for 30 min. A 100-μl volume of sample was mixed with 150 μl of 3,5-dinitrosalicylic acid reagent, and after boiling for 10 min, the absorbance at 540 nm was measured. One unit of enzymatic activity was defined as the amount of enzyme required to produce a 1 μmol reduction sugar per min under the assay conditions.

The activity of free or assembled enzymes was assayed in the presence of 0.75% (wt/vol) CMC at 37°C in 20 mM sodium phosphate buffer (pH 7.0). The reduction sugars were measured as described above. Glucose concentration was determined using an SBA biosensor analyzer (Biology Institute of Shandong Academy of Sciences, Jinan, China).

Results and discussion

Selection and characterization of interacting proteins

To synthesize the protein scaffold, three pairs of interacting proteins from E. coli K12 were expressed in E. coli BL21 (DE3). The six proteins were purified by Ni-chelating affinity chromatography (Figure 2A), and protein-protein affinity was measured by biolayer interferometry [23-26], in which the obtained values reflect the amount of protein bound to the biosensor. The response values (Figure 2B,C,D) confirmed their binding, and the KD calculated by Fortebio Data Analysis software version 7.0 for IPA-IPa (7.36 × 10−8 M), IPB-IPb (1.39 × 10−12 M), and IPC-IPc (5.27 × 10−8 M) demonstrated their high affinity, suggesting that they are suitable for constructing protein scaffolds.

Figure 2
figure 2

Purification of interaction proteins and their binding affinity. (A) SDS-PAGE analysis of purified interaction proteins. Biolayer interferometry sensorgrams of (B) IPA-IPa, (C) IPB-IPb, (D) IPC-IPc. IPA, IPB, and IPC were immobilized to the streptavidin-coated biosensors, respectively. Then IPa, IPb, and IPc were bound to the corresponding proteins, respectively. The figure shows the response of association and dissociation. All the response value was normalized by minusing the value of control.

Full size image

Fusion of cellulases and interacting proteins

The three cellulases were fused with the interacting proteins IPa, IPb, and IPc, which endowed them with an interaction interface. To minimize the effect of fusion on enzymatic activity, six fusion proteins were generated by attaching the interacting proteins to the C or N terminus of cellulases. The commonly used glycine-serine linker (G4S)2 was used to link two proteins and thereby reduce folding interference [27]. The resultant constructs were expressed in E. coli with a 6-histidine tag at the N terminus and purified by Ni-chelating affinity chromatography. IPa could only be attached to the N terminus of celCCA (IPaA) (Figure 3A), given that partial proteolysis occurred at the C terminus [19]. Similarly, the ideal celCCE and IPb fusion was obtained by attaching IPb to the N terminus of celCCE (IPbE). For the cel2454-IPc fusion, the activity of IPc4 was slightly higher than that of 4IPc (Figure 3D), and the former was therefore chosen for the assembly. The three enzyme fusions that were ultimately selected retained almost all of the specific activity of the respective unfused proteins (Figure 3B,C,D), indicating that protein structure was not appreciably compromised by the fusion.

Figure 3
figure 3

Characterization of cellulases fused with interaction proteins. (A) SDS-PAGE analysis of purified cellulases. The activities of (B) endoglucanase, (C) exoglucanase, (D) β-glucosidase were assayed. The arrows indicate the expected fusion proteins.

Full size image

Construction of scaffolds and their effect on assembled enzyme complexes

To determine the appropriate order of cellulases within assemblies, three protein scaffolds were constructed by fusing the three interacting proteins (IPA, IPB, and IPC) in different orders and assembling three tri-enzyme complexes by mixing the scaffolds and cellulases in a 1:1:1:1 stoichiometry for 1 h. The reduction sugars from CMC hydrolysis catalyzed by the three tri-enzyme complexes were assayed. The complex assembled with ScafBAC had the highest sugar reduction (Figure 4), indicating that the synergistic effect was related to the location of the enzyme within the complex. Given that the activity of EG is much higher than that of CBH or BGL, oligosaccharides and cellobioses produced by EG can be immediately catalyzed by CBH and BGL when EG is between CBH and BGL.

Figure 4
figure 4

Reducing sugar production by free cellulases or three multienzyme complexes assembling with different scaffolds. 1.5 g/l of CMC was catalyzed by 0.6 μM of enzyme for 30 min. ‘Free’ means three fusion cellulases without scaffolds.

Full size image

Characterization of the tri-enzyme complex assembled by ScafBAC

The fused cellulases and protein scaffold were purified using a Ni-sepharose column, and the correct formation of the protein assembly as well as the affinity of each cellulase fused to the protein scaffold was verified by biolayer interferometry [28] (Figure 5). The response of biolayer interferometry is dependent on the amount of proteins bound to the biosensor which indicates the binding of proteins. Although different binding responses were observed for the three cellulase fusions, they were all attached to the scaffold. Moreover, the binding responses were similar to values obtained for the interacting proteins, indicating that the binding affinity was not affected by the fusion.

Figure 5
figure 5

Biolayer interferometry sensorgrams of cellulases binding to biotinylated scaffold on streptavidin-coated biosensors. Biotinylated scaffold was immobilized to the streptavidin-coated biosensors. Then IPc4, IPbE, and IPaA were bound to the scaffold. The figure shows the response of association with IPc4, IPbE, and IPaA. All the response value was normalized by minusing the value of control.

Full size image

The potential for synergistic effects on enzyme cascades is the most interesting property of protein assemblies. The capacity for CMC hydrolysis was compared between the tri-enzyme complex and free cellulases. Catalytic activity was evaluated by glucose production using a SBA biosensor analyzer. After a 4-h reaction, a 1.5-fold enhancement in activity was observed for the tri-enzyme complex as compared to the corresponding free enzymes (Figure 6), suggesting the channeling of intermediates within the complex; that is, cellobiose generated by EG and CBH was immediately transferred to the adjacent BGL for glucose production, thereby resulting in enhanced cellulose hydrolysis.

Figure 6
figure 6

Glucose production of catalyzed by multienzyme complex or by equal amount of free cellulases. 7.5 g/l of CMC was catalyzed by 0.6 μM of enzyme. ‘Free’ means three fusion cellulases without scaffolds.

Full size image

Conclusions

An artificial tri-enzyme complex was constructed by assembling three cellulases with a novel protein scaffold composed of interacting proteins. The effect of the order of cellulase within the scaffolds on the catalytic efficiency was determined. Moreover, the complex had higher catalytic activity than the individual components. These results suggest that this novel protein scaffold can serve as a powerful tool for facilitating multienzyme cascades.

References

  1. Ricca E, Brucher B, Schrittwieser JH (2011) Multi-enzymatic cascade reactions: overview and perspectives. Advan Synthesis Catalysis 353(13):2239–2262

    Article  CAS  Google Scholar 

  2. Conrado RJ, Varner JD, DeLisa MP (2008) Engineering the spatial organization of metabolic enzymes: mimicking nature’s synergy. Curr Opin Biotechnol 19(5):492–499

    Article  CAS  Google Scholar 

  3. Schoffelen S, van Hest JCM (2012) Multi-enzyme systems: bringing enzymes together in vitro. Soft Matter 8(6):1736–1746

    Article  CAS  Google Scholar 

  4. Adlakha N, Sawant S, Anil A, Lali A, Yazdani SS (2012) Specific fusion of beta-1,4-endoglucanase and beta-1,4-glucosidase enhances cellulolytic activity and helps in channeling of intermediates. Appl Environ Microbiol 78(20):7447–7454

    Article  CAS  Google Scholar 

  5. Schoffelen S, Beekwilder J, Debets MF, Bosch D, van Hest JC (2013) Construction of a multifunctional enzyme complex via the strain-promoted azide-alkyne cycloaddition. Bioconjug Chem 24(6):987–996

    Article  CAS  Google Scholar 

  6. Fu J, Liu M, Liu Y, Woodbury NW, Yan H (2012) Interenzyme substrate diffusion for an enzyme cascade organized on spatially addressable DNA nanostructures. J Am Chem Soc 134(12):5516–5519

    Article  CAS  Google Scholar 

  7. Sun Q, Madan B, Tsai SL, DeLisa MP, Chen W (2014) Creation of artificial cellulosomes on DNA scaffolds by zinc finger protein-guided assembly for efficient cellulose hydrolysis. Chem Commun (Camb) 50(12):1423–1425

    Article  CAS  Google Scholar 

  8. Dueber JE, Wu GC, Malmirchegini GR, Moon TS, Petzold CJ, Ullal AV, Prather KL, Keasling JD (2009) Synthetic protein scaffolds provide modular control over metabolic flux. Nat Biotechnol 27(8):753–759

    Article  CAS  Google Scholar 

  9. You C, Myung S, Zhang YH (2012) Facilitated substrate channeling in a self-assembled trifunctional enzyme complex. Angew Chem Int Ed Engl 51(35):8787–8790

    Article  CAS  Google Scholar 

  10. Hirakawa H, Nagamune T (2010) Molecular assembly of P450 with ferredoxin and ferredoxin reductase by fusion to PCNA. ChemBioChem 11(11):1517–1520

    Article  CAS  Google Scholar 

  11. Liu F, Banta S, Chen W (2013) Functional assembly of a multi-enzyme methanol oxidation cascade on a surface-displayed trifunctional scaffold for enhanced NADH production. Chem Commun (Camb) 49(36):3766–3768

    Article  CAS  Google Scholar 

  12. Tsai SL, DaSilva NA, Chen W (2013) Functional display of complex cellulosomes on the yeast surface via adaptive assembly. ACS Synth Biol 2(1):14–21

    Article  CAS  Google Scholar 

  13. Borne R, Bayer EA, Pages S, Perret S, Fierobe HP (2013) Unraveling enzyme discrimination during cellulosome assembly independent of cohesin-dockerin affinity. FEBS J 280(22):5764–5779

    Article  CAS  Google Scholar 

  14. Fan LH, Zhang ZJ, Yu XY, Xue YX, Tan TW (2012) Self-surface assembly of cellulosomes with two miniscaffoldins on Saccharomyces cerevisiae for cellulosic ethanol production. Proc Natl Acad Sci U S A 109(33):13260–13265

    Article  CAS  Google Scholar 

  15. Geddes CC, Nieves IU, Ingram LO (2011) Advances in ethanol production. Curr Opin Biotechnol 22(3):312–319

    Article  CAS  Google Scholar 

  16. Rizk M, Antranikian G, Elleuche S (2012) End-to-end gene fusions and their impact on the production of multifunctional biomass degrading enzymes. Biochem Biophys Res Commun 428(1):1–5

    Article  CAS  Google Scholar 

  17. Liu M, Yu H (2012) Co-production of a whole cellulase system in Escherichia coli. Biochem Eng J 69:204–210

    Article  CAS  Google Scholar 

  18. Levchenko A, Hu P, Janga SC, Babu M, Díaz-Mejía JJ, Butland G, Yang W, Pogoutse O, Guo X, Phanse S, Wong P, Chandran S, Christopoulos C, Nazarians-Armavil A, Nasseri NK, Musso G, Ali M, Nazemof N, Eroukova V, Golshani A, Paccanaro A, Greenblatt JF, Moreno-Hagelsieb G, Emili A (2009) Global functional atlas of Escherichia coli encompassing previously uncharacterized proteins. PLoS Biol 7(4):e1000096

    Google Scholar 

  19. Fierobe HP, Gaudin C, Belaich A, Loutfi M, Faure E, Bagnara C, Baty D, Belaich JP (1991) Characterization of Endoglucanase A from Clostridium cellulolyticum. J Bacteriol 173(24):7956–7962

    CAS  Google Scholar 

  20. Gaudin C, Belaich A, Champ S, Belaich JP (2000) CelE, a multidomain cellulase from Clostridium cellulolyticum: a key enzyme in the cellulosome. J Bacteriol 182:1910–1915

    Article  CAS  Google Scholar 

  21. You C, Zhang XZ, Zhang YH (2012) Simple cloning via direct transformation of PCR product (DNA multimer) to Escherichia coli and Bacillus subtilis. Appl Environ Microbiol 78(5):1593–1595

    Article  CAS  Google Scholar 

  22. Naik S, Kumru OS, Cullom M, Telikepalli SN, Lindboe E, Roop TL, Joshi SB, Amin D, Gao P, Middaugh CR, Volkin DB, Fisher MT (2014) Probing structurally altered and aggregated states of therapeutically relevant proteins using GroEL coupled to bio-layer interferometry. Protein Sci 23(10):1461–1478

    Article  CAS  Google Scholar 

  23. Fierobe HP, Mingardon F, Mechaly A, Belaich A, Rincon MT, Pages S, Lamed R, Tardif C, Belaich JP, Bayer EA (2005) Action of designer cellulosomes on homogeneous versus complex substrates: controlled incorporation of three distinct enzymes into a defined trifunctional scaffolding. J Biol Chem 280(16):16325–16334

    Article  CAS  Google Scholar 

  24. Wei ZH, Chen H, Zhang C, Ye BC (2014) FRET-based system for probing protein-protein interactions between sigma(R) and RsrA from Streptomyces coelicolor in response to the redox environment. PloS One 9(3):e92330

    Article  Google Scholar 

  25. Prischi F, Konarev PV, Iannuzzi C, Pastore C, Adinolfi S, Martin SR, Svergun DI, Pastore A (2010) Structural bases for the interaction of frataxin with the central components of iron-sulphur cluster assembly. Nat Commun 1(95):1–10

    Google Scholar 

  26. Maun HR, Wen X, Lingel A, de Sauvage FJ, Lazarus RA, Scales SJ, Hymowitz SG (2010) Hedgehog pathway antagonist 5E1 binds hedgehog at the pseudo-active site. J Biol Chem 285(34):26570–26580

    Article  CAS  Google Scholar 

  27. Lu P, Feng MG (2008) Bifunctional enhancement of a beta-glucanase-xylanase fusion enzyme by optimization of peptide linkers. Appl Microbiol Biotechnol 79(4):579–587

    Article  CAS  Google Scholar 

  28. Smith MC, Scaglione KM, Assimon VA, Patury S, Thompson AD, Dickey CA, Southworth DR, Paulson HL, Gestwicki JE, Zuiderweg ER (2013) The E3 ubiquitin ligase CHIP and the molecular chaperone Hsc70 form a dynamic, tethered complex. Biochemistry 52(32):5354–5364

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work supported by National Special Fund for State Key Laboratory of Bioreactor Engineering (2060204), and ‘the Fundamental Research Funds for the Central Universities’, People’s Republic of China.

Author information

Authors and Affiliations

  1. State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, 130 Meilong Rd, Shanghai, 200237, People’s Republic of China

    Ting Yu, Xin Gao, Yuhong Ren & Dongzhi Wei

Authors
  1. Ting Yu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Xin Gao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Yuhong Ren
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Dongzhi Wei
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yuhong Ren.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

TY carried out the experiment and drafted the manuscript. XG participated in the design of the study and revised the manuscript. YR and DW conceived of the study, participated in its design and coordination. All authors read and approved the final manuscript.

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yu, T., Gao, X., Ren, Y. et al. Assembly of cellulases with synthetic protein scaffolds in vitro . Bioresour. Bioprocess. 2, 16 (2015). https://doi.org/10.1186/s40643-015-0046-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s40643-015-0046-8

Keywords